Detail Thick Film Power Low ohm Current Sense Chip Resistor ( Reverse ) 2019-01-30T10:27:31+00:00

APPLICATION

Thick Film Power Low ohm Current Sense Chip Resistor ( Reverse )

Spec

0201 – 1206, 0.01 – 0.100ohm, ±5%, ±1%, TC100 – 500

Description

The resistors are constructed in a high grade ceramic body (aluminum oxide). Internal metal electrodes are added at each end and connected by a resistive paste that is applied to the top surface of the substrate. The composition of the paste is adjusted to give the approximate resistance required and the value is trimmed to
nominated value within tolerance which controlled by laser trimming of this resistive layer.
The resistive layer is covered with a protective coat. Finally, the two external end terminations are added. For ease of soldering the outer layer of these end terminations is a Tin (lead free) alloy.

Features

1. High power rating and low range
2. High reliability and stability
3. Suitable for current sensing of small mobile devices
4. RoHS compliant & Lead free
5. Up side down mounting to minimize resistance drift after soldering

Download