Detail Thick Film General Purpose Chip Resistor 2019-05-03T16:31:51+00:00


Thick Film General Purpose Chip Resistor


01005 – 2512, 1 – 10Mohm, ±5%, ±1%,


The resistors are constructed in a high grade ceramic body (aluminum oxide). Internal metal electrodes are added at each end and connected by a resistive paste that is applied to the top surface of the substrate. The composition of the paste is adjusted to give the approximate resistance required and the value is trimmed to within tolerance by laser cutting of this resistive layer.
The resistive layer is covered with a protective coat. Finally, the two external end terminations are added. For ease of soldering the outer layer of these end terminations is Tin solder (Pb free) alloy.
Available sizes from 01005 to 2512 with power rated up to 1W, and Resistance Range from 1 ohm to 10Mohm.


1. High reliability and stability
2. Reduced size of final equipment
3. Lower assembly costs
4. Higher component and equipment reliability
5. RoHs compliant and lead free products

Data Sheets