0612 – 1225, 1 – 1Mohm, ±5%, ±1%, TC100

Description

The resistors are constructed in a high grade ceramic body (aluminum oxide). Internal metal electrodes are added at each end and connected by a resistive paste that is applied to the top surface of the substrate. The composition of the paste is adjusted to give the approximate resistance required and the value is trimmed to nominated value within tolerance which controlled by laser trimming of this resistive layer.
The resistive layer is covered with a protective coat. Finally, the two external end terminations are added at longer sides. For ease of soldering the outer layer of these end terminations is Tin (lead free) alloy.

Features

1. Power upgraded & Rated up to 2Watt
2. Resistance Range: 1 ohm ~ 1Mohm
3. Chip Size: 1225, 1020, 0612,
4. Tolerance: ± 5%, ± 1%
5. T.C.R : ± 200 ppm