Thick Film Power Low ohm Current Sense Chip Resistor
0402 – 2512, 0.01 – 0.976ohm, ±5%, ±1%, TC100 – 300
The resistors are constructed in a high grade ceramic body (aluminum oxide). Internal metal electrodes are added at each end and connected by a resistive paste that is applied to the top surface of the substrate.
The composition of the paste is adjusted to give the approximate resistance required and the value is trimmed to nominated value within tolerance which controlled by laser trimming of this resistive layer.
The resistive layer is covered with a protective coat. Finally, the two external end terminations are added.
For ease of soldering the outer layer of these end terminations is Tin (lead free) alloy.
1. High power rating and compact size
2. High reliability and stability
3. Reduced size of final equipment
4. RoHS compliant and lead free products.